Release Notes  FT-8800 (click BACK to return to the website)

Version 2.19 ===================================================================

Corrected Paste so that all data is pasted to the new location.

Added message when Sending data to the radio and an error occurs after the 
header is sent.  The message warns that the hardware information in the file
does not match the radio.

Made changes to make the Get Data From screen appear quicker.

Version 2.18 ===================================================================

Corrected a problem with Memory Bank # in the Hyper Memories not going to the 
radio.  Now when a Memory Bank # is chosen, first there is a check to determine
if that bank has memories assigned.  Next the first memory in that Bank is 
selected and then Memory Bank On is checked.

Version 2.17 ===================================================================

Removed code that was attempting to use an undefined variable to init the 
setting screen.

Modified the code to enable Copy and Paste on all frequencies grid and disable 
Insert, Delete, Sort on the VFO, Home and HyperMemory grid. Also made sure the 
skip data was properly updated when pasting on the Left or Right Memory grids.


Version 2.16 ===================================================================

Removed Narrow check box from the setting screen as it is not a global function.  
Use the Operating Mode in the channels to set Narrow FM on the selected channel.

Corrected the code the fill the Selected Hyper Memory and copy the HyperMemory 
frequencies to the VFO grid when a file is opened or read from the radio.

Corrected the code so that the settings on the hypermemory channels save.

Disabled the check boxes on the hypermemory channel that deal with scanning.

Corrected the code where the step was to be saved. Now the step for all 
frequencies is correctly saved to the file.

Added Step to the column definitions for importing data.

Version 2.15 ===================================================================

Changed the way HyperMemories are saved to the radio.  The FT-8800 does not 
really have a VFO section that is separate from the HyperMemories.  The VFO on 
the radio is the currect Hyper Memory channel.  The VFO tab in the programmer now 
points correctly to the selected HyperMemory.  A combo was added to the VFO tab 
to select the HyperMemory that is be be active when the data is sent to the radio.

Corrected the code so import would would go into either the left or right side.

Found that the label for the combo boxes was reversed and corrected the labels so 
that Right and Left label are beside the corresponding combo boxes. Also change 
the order of the text in the combo box list to match the order in the radio.

Removed Packet and Packet Band from setting screen since these are in the 
individual hypermemory channels.

Removed Sub Display from setting screen since these are in the individual 
hypermemory channels.

Removed Auto Repeater Shift from setting screen since these are in the 
individual hypermemory channels.

Removed AutoAM from setting screen since these are in the individual 
hypermemory channels.

Removed VFO Tracking from setting screen since these are in the individual 
hypermemory channels.

Disabled the following settings in the HyperMemories that should not be edited:
	Scanning
	Memory Tune On
	ARTS On
	Memory Bank On
	Priority On
	Special Scan On

Version 2.14 or before =======================================================

Transmit frequency change to 600.000 for a "split" frequency pair. 

Saving comments for a memory channel 

Memory channel copy and paste functionality 

Memory channel deletion 

Removal of mask column for memory channels (Mask is not a function of this radio) 

Memory bank saving 

Microphone selection in the Settings 

Operating mode setting in memory (FM does not reset to AM when file sent to radio) 

Access to the Help file is available from the Main page of the programmer